Waterslide Decal paper for Inkjet printers. Suitable for embellishing book covers, model making, decoupage, hobby crafts and home decorating. This amazing transfer paper can be used on anything from wood to porcelain. Print out your own designs and photographs for personalizing your projects! Available per sheet or per packet (8 sheets). Instructions included. Individual sheet size: A4 - 210 x 297. Instructions:- Print your image on the smooth, white chalky side of the paper. Do not use too much ink and click off any high speed or draft options. Allow to dry for 30 minutes then cut to size, soak in water until the decal releases (approx. 60 seconds). For smooth non-absorbent surfaces such as glass, ceramics, plastic and metals there is enough gum on the back of the decal to give good adhesion although a little (methylated spirits) alcohol on the receiving surface improves adhesion. For more absorbent surfaces such as wood then use the following method (using real turpentine) to melt the decal to the surface. Paint the wood etc. with a good coat of real turpentine (white spirits or any substitute will not work). Apply the decal onto the turpentine painted surface image side upwards and carefully remove any air bubbles. Leave to dry for several hours. The decal will dry with a white background. To finish apply a few coats of any oil/spirit based varnish to protect and make the decal transparent. It you wish the decal to remain white then apply any water-based varnish.
Showing all 2 results